Vinyl flooring price Malaysia and their removal process are the famous searches of Malaysian today. Here is a step-by-step guide of remove vinyl flooring in Malaysia with prices for you! Vinyl flooring is one of the most popular types of flooring in Malaysia, but sometimes it needs to be replaced. Maybe your vinyl flooring is old and outdated, or maybe there are stains and damages that you want to get rid of. Whatever the reason, vinyl flooring removal can be a daunting task. But don’t worry, we’re here to help! In this blog post, we will walk you through the entire process of vinyl floor removal, including the cost involved. Let’s get started!
What is Vinyl Flooring?
Before we get into the vinyl floor removal process, let’s first take a quick look at what vinyl flooring actually is. Vinyl flooring is a type of flooring that is made from vinyl (a type of plastic) and synthetic fibers. It is available in both sheet form and tile form, and it can be installed in either a floating or glued-down installation. Vinyl flooring is durable, easy to clean, and relatively affordable, making it a popular choice for both residential and commercial applications.
Equipment and Tools for Removing Vinyl Flooring and their Price in Malaysia
- Flat pry bar – RM15
- Mallet or hammer – RM15
- 5-in-1 tool – RM25
- Utility knife – RM15
- Heat gun – RM100
The vinyl floor removal process will require some basic tools, which you can purchase at most home improvement stores. The items that you will need include a flat pry bar, mallet or hammer, a five-in-one tool, a utility knife, and a heat gun. The total cost for these items will be around RM200.
How to Remove Vinyl Flooring: The Step-by-Step Guide
Now that you have the necessary equipment, let’s take a look at the vinyl floor removal process. The steps below will walk you through the entire process, from start to finish.
Step One: Remove the Quarter-Round Trim
The first step of removing vinyl flooring is to remove the Quarter-Round Trim. Quarter-round trim is a small piece of wood that is used to cover the gap between the floor and the wall. This will expose the nails that hold the vinyl flooring in place. You can then use a pry bar to remove the vinyl flooring.
Step Two: Remove the Baseboard Trim
The next step in removing your vinyl flooring is to remove the baseboard trim. You can do this by using a putty knife or similar tool to pry the trim away from the wall. Once you have removed the trim, be sure to vacuum or sweep up any dirt or debris that may have been behind it. With the baseboard trim out of the way, you should now have full access to your vinyl flooring and can proceed with removing it.
Step Three: Try Removing the Center Section of Flooring
There are typically three sections to a vinyl floor: the front, the center, and the back. The front and back are attached to one another by means of a lip that wraps around the edge of the flooring. The center section is typically not glued down and can be removed relatively easily.
To remove the center section of vinyl flooring:
- Insert a pry bar between the front and back sections of flooring and lever them apart.
- Working from one end to the other, pry up on the center section of flooring until it pops loose.
- Carefully pull up the center section of flooring and discard it.
Step Four: Cut the Flooring Into Strips
The fourth step of removing vinyl flooring is to cut the flooring into strips. This will make it easier to remove the flooring and also help to prevent it from becoming tangled or caught on anything. Use a sharp blade to make clean cuts, and be sure to work carefully so that you don’t injure yourself.
Step Five: Remove Glued-Down Flooring With a Pry Bar
The fifth step of removing vinyl flooring is to remove glued-down flooring with a pry bar. This can be a difficult and time-consuming task, but it is important to make sure that all of the vinyl floorings is removed before proceeding to the next step. If you are not careful, you may damage the subfloor or the finish on your floors.
Step Six: Use a 5-in-1 Tool
The sixth step of removing vinyl flooring is to use a 5-in-1 tool. This will help to remove any remaining adhesive or tape residue. First, score the adhesive with the blade of the tool. Next, pry up the adhesive with the claw end. Finally, scrape away any remaining debris with the sandpaper attachment.
Step Seven: Peel Away by Hand
The seventh and final step in removing vinyl flooring is to peel away any remaining pieces by hand. It can be either straight upward or backward. This is a time-consuming process, but it is important to make sure that all of the vinyl has been removed.
Step Eight: Use a Heat Gun
The eighth step of removing vinyl flooring is to use a heat gun. A heat gun will help soften the adhesive that is holding the vinyl in place, making it easier to remove. Be sure to keep the heat gun moving so you don’t burn the vinyl or the underlying floor.
Step Nine: Dispose of the Old Flooring
The last step in removing vinyl flooring is to dispose of the old flooring. You can do this by taking it to a local recycling center or by simply throwing it away. Be sure to check with your municipality on their specific regulations for disposing of old vinyl flooring.
Conclusion
Removing vinyl flooring can be a difficult and time-consuming process, but it is important to make sure that all of the vinyl floorings is removed before proceeding to the next step. If you are not careful, you may damage the subfloor or the finish on your floors. By following these nine steps, however, you can remove your vinyl flooring without any trouble.
If you’re looking for a professional vinyl flooring removal service at a cheaper price in Malaysia, be sure to get in touch with Advanced Polytech! Advanced Polytech offers vinlyl flooring with competitive prices in Malaysia and their team of experienced professionals will have your vinyl flooring removed quickly and efficiently. Contact them today for more information!
This article is posting at Postipedia.
