Dryer vents are comparatively slow. Many people tend towards dryer booster fan installation to boost their working and efficiency. Booster fans increase the working of a dryer. They work as a catalyst. In the article, we will learn about dryer booster fan installation and how to take care of them. People should do periodic inspections and clean exhaust fan ducts regularly.
Why Are Booster Fans Necessary?
Normally, if we have installed dryers and dryer ducts in our home, we may face the following problems:
- The dryer takes too much time
- Dryer ducts get accumulated with lints
Booster fans are the only reliable solution to these issues.
Mainly, long and twisted dryer ducts cause these issues in the network. Due to this, a pressure drop occurs in these ducts. Consequently, the working of the vents is highly affected. It is normal to hear that the longer the flue, the more time it takes to dry our clothes and stuff. For instance, a 50-foot long duct needs approximately 2 hours to dry our clothes.
In order to solve this issue, we need to install fans. Firstly, a booster fan helps in saving time. Secondly, fans are less expensive and save us money. Thus, experts recommend installing fans in our ducts.
When We Should Install Fans In Our Duct Network:
According to research, we should install fans in our duct network when our ducts exceed the below-mentioned measurements:
- If our duct has zero bends, it should be 25″ long.
- With one bend, the duct should be 20″ long.
- The ideal length with two turns would be 15″.
- The duct should be 10″ in length with more than two bends.
How To Install a Booster Fan In Your Dryer Duct Network:
To install a booster fan, you need to follow the below-mentioned instructions:
-
Select The Location:
We need to mount our fan at the minimum height of 15 feet from the dryer vent. Keeping the distance between the duct and fan less than 15 feet might suck the lint from the ducts. As a result, lint will get accumulated in the fan. Hence, reducing the efficiency of the fan. Therefore, professionals recommend installing a fan at the optimum height. However, you can mount your fan closer to the place where ducts are terminated.
-
Install Fan Bracket:
After you have selected the location of your fan, install the mounting bracket. Use the wooden screws. Do not use steel screws. This mounting bracket will support the booster fan. Racks mostly come with a gasket or lining. This lining insulates the bracket and minimizes the vibration produced by the fan. Secondly and most importantly, it also prevents noise from traveling into the duct network. Thus, we can say that it halts the noise.
Do not over-tighten the bracket. Install your booster fan horizontally to the duct network. Drill the hole according to the measurement of your booster fan.
-
Install Your Fan:
Place your switch diaphragm in a vertical position for optimum working and sensitivity. In addition to this, you need to put the wiring case in an easy place.
Thirdly, attach your fan with the mounting bracket. Use self-tapping screws.
-
Do The Trial Test:
Lastly and most importantly, you need to do a trial test to check the working of the fan.
How To Take Care Of Your Fan:
You need to maintain the condition of your fan. Follow the below-mentioned instructions to take care of your fan:
Firstly, do not apply excessive lubricants to your fan. Every fan comes with internal lubricants. Therefore, there is no need to use lubricating material externally.
Commonly, fan impellers may accumulate lint. It can pick up lint from the dryer ducts. We need to perform an inspection occasionally to remove the lint from the fan impeller. For instance, you can perform a check twice a year.
However, if your fan is producing excessive and unnecessary vibration and sound, it might hint towards the inspection.
How To Clean Your Fan:
In order to remove lint and dust, you need to clean the impellers of your booster fan. You can contact professionals for air duct cleaning in Duluth, GA. Their cleaners are affordable and the best at their job. If you want to treat yourself, contact them now. However, you can do it at home easily. Follow the below mentioned DIY steps to clean your fan:
- Firstly, you need to disconnect the electrical supply
- Secondly, disengage the duct from the fan outlet.
- Thirdly, remove the covering of the fan and collect all the lint and dust from the fan.
- Lastly, repeat the procedure in reverse and do a trial test to ensure the working of the fan.
Conclusion:
In conclusion, we can say that booster fans are the necessitous component of a dryer duct network. The duct network with a booster fan is less chaotic than a fan-less duct network. Additionally, they can save us from so many accidents and fire hazards. These fans also give their optimum output. They increase the efficiency of a duct system. Therefore, every house should have fans installed in its dryer duct network.
Also Read: Buy Best Organic Honey Online in 2022
